GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 110 / 278

110 KARRERA K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
Changing Image Store IP Address
The Image Store IP address can be changed using the Video Processor
Frame web page. See
Setting IPs with Device Web Pages on page 108 for more
information.
Changing Control Panel IP Addresses
A Karrera K-Frame Control Panel’s IP address can be changed using
various methods:
• K-Frame Switcher Installer program (see Setting IPs with the K-Frame
Switcher Installer Program on page 105 ).
• the Karrera K-Frame Control Panel webpage (see Set IP Procedure Using
Device Web Pages on page 108 ),
• the Grass Valley NetConfig application, or
• Control Panel IP Address mode on a panel EMEM area (see below).
Control Panel EMEM IP Address Mode
A Control Panel’s EMEM area can be used to change the IP address of the
that panel, set its Subnet Mask and Gateway addresses, and enter the IP
address the Control Panel will use to communicate with the Video Pro-
cessor Frame.
Setting The Control Panel’s IP Address
1. On any EMEM area, press
Menu
,
Page
. This shows a list of menu items
that are selected with the buttons below the display ( Figure 72 , left).
Figure 72. Karrera K-Frame Panel IP Address Mode Selection, EMEM Area
2. Select IP Addr (press Lrn ) to enter IP Address mode ( Figure 72 , right).
Me Me nu
Pa us e Pa us e 9 Ba n k a n k
3 / 7
7 8
L rn
Menu 1
Trans
Rate
Stripe
Delg
Panel
Mem
Macro
Me Me nu
Pa us e Pa us e 9 Ba n k a n k
3 / 7
7 8
L rn
Menu 2
Panel
Saver
IP
Addr
Calib Time Date
8804_06