GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 105 / 278

KARRERA K-FRAME — Installation & Service Manual 105
Network Configuration
See your network System Administrator before connecting the Karrera K-
Frame system to an existing network or making any IP address changes.
The IP addresses (including any Subnet mask) of all the Karrera K-Frame
devices on the network must be known before any changes are made.
Setting IPs with the K-Frame Switcher Installer Program
The K-Frame Switcher Installer Program can be used to set IP addresses of
the Karrera K-Frame Video Processor and Karrera K-Frame Control Panels.
When the Karrera K-Frame software package has been deployed to your
Menu Panel or PC, the K-Frame Installer icon will appear on the desktop
(
Figure 67 ).
Note A mouse and keyboard is required to navigate through the K-Frame Installer
program and enter IP numbers and system names. Standard USB devices
can be connected to any of four available ports on the Karrera K-Frame Menu
Panel.
Karrera K-Frame System Names
The K-Frame Installer program includes a hierarchy display of Karrera K-
Frame system components. This hierarchy starts with the name of the
Karrera K-Frame system, and groups that system’s Video Processor Frame
with the Control Panel(s) configured with that Frame. The Karrera K-
Frame system name is taken from the Video Processor Frame name. This
hierarchy allows easy identification of each Karrera K-Frame system when
multiple systems reside on the same network (
Figure 68 ).
Figure 68. K-Frame Switcher Installer Program Hierarchy, Multiple Systems
Figure 67. Installer Icon