GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 134 / 278

134 KARRERA K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
Figure 89. On Air Tally Menu, PGM/PST Outputs
Calc On
- Turns the delegated Tally Calculator on or off. When on, the
Calcu-
lation Enables
button on the separate Relay Assign menu will be activated for
that calculator.
Groups Enabled
- Reports which Tally Groups are currently assigned for that
calculator, by group letter (A, B, C, D, corresponding to Tally/GPI connec-
tors 1-4 on the rear of the Karrera K-Frame Video Processor). To Enable a
Tally Relay Group, it must first be turned on, using the
Calc On
button for
that calculator.
The first tally calculator name is fixed to
On Air
. Since the On Air Calculator
is restricted the Look Ahead and Bus buttons are disabled (grayed out).
Creating an On Air Tally Calculator Using MEs or PGM/PST
1. If necessary, login to the desired suite ( Eng Setup , Eng Login ).
2. Touch
Eng Setup
,
Switcher Tally
,
On Air Tally
to access the On Air Tally menu.
The Suite button for the current suite will be highlighted.
3. Touch a
Tributary
button on the right.
4. Touch an
ME
or
PGM/PST
button on the left.
5. Touch an Output button to assign that output of that ME or PGM/PST
to that tributary. The name of the output is displayed on the Tributary
button.