GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 144 / 278

144 KARRERA K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
2. Go to the Node Settings menu by touching
Eng Setup
,
Node Settings
,
Frame
Suite Nodes & ID
( Figure 96 ).
3. Input a valid IP address for the ClipStore server by touching the
ClipStore IP Address
data pad, typing the address, and touching
Enter
( Figure 96 ).
4.
Touch the
Enable
button ( Figure 96 ).
The Enable button allows communication between the Karrera K-
Frame and the ClipStore server and highlights green indicating a
proper connection. Red will show no connection and yellow shows that
some channels are connected. For both red and yellow indications,
ensure that channels are in AMP mode and available for remote control.
Other troubleshooting may be required.
Figure 96. ClipStore Node Settings
Configuring Source Definitions
To configure source definitions for ClipStore return outputs, choose a
source, a source type, an input, and in the case of a key, an Engineering
Name for the source if desired.
The following example demonstrates the configuration of a Summit with
four ClipStore channels. In this example the physical BNC connections
from the ClipStore to the K-Frame are Inputs 25-32.