GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 140 / 278

140 KARRERA K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
3. Select one of the four Tally Calc tabs.
4.
Select the Calc Name data button and enter a descriptive name for the
calculation;
LAP 1
for Look Ahead Preview in Suite 1 as an example.
5.
Assign tributaries to the four Look Ahead Previews:
a. Select
LAP 1
then
Tributary 4
,
b. Select
LAP2
then
Tributary 3
, and so on.
6.
Turn on the calculation by selecting the
Calc On
button (highlights green
when on).
7.
Select the
MV Tally
tab.
8. Select the LAP configured tally calculation; for example
Calc 1 LAP 1
.
Set Source Names with External Ethernet Tally
Support for setting source names through external Ethernet tally clients can
be added by tally client developers. Once enabled, the tally client can send
data to the Frame that will modify any or all source names in the system,
including the Engineering Names for each source. Additionally, the
Control Panel, OLED, and Menu names for each logical source in each suite
can be set externally.