GRASS VALLEY KARRERA K-FRAME, Инструкция по установке и обслуживанию, Страница: 80 / 278

80 KARRERA K-FRAME — Installation & Service Manual
Section 4 — System Cabling
Figure 52. Local Aux Panel Cabling
Video Cabling
All K-Frame system video inputs and outputs are configurable. For cabling
configuration flexibility, each external primary input can be mapped to any
control panel source select button, as can each internal video system source.
Any K-Frame system video signal, such as ME program, preview, clean
feed, or PGM/PST, can be mapped to any output bus to be sent to any
output connector, or an output bus can act as an auxiliary bus.
Inputs
Non-looping video inputs on the back of the Video Processor Frame are
numbered 1 through 32 on each input module. Each accepts a 270 MHz,
1.485 Gb, or 3 Gb serial digital video signal. The number of inputs that are
active depends on the number of ME boards installed in the chassis.
Twenty four inputs are active for every board installed.
Outputs
Paired outputs on the back of the Video Processor Frame are numbered 1
through 16 on each output module. Identical signals are present on each of
the paired output connectors. All of the outputs carry the same video
format, as determined by the standard selected and by the reference signals
connected.
Red un da n t AC
Powe r S o ur ce s (2)
Pa n el to
Local A u x Co n t r ol
( n ot Ethe rn et)
8804_42_
r
1
Ka rr e r a Co n t r ol Pa n el ( r ea r )
Ka rr e r a Local
A u x Pa n el
To
S witche r
Ethe rn et
Netwo r k
12 Volt
DC O
u t
12 Volt
DC I n
U s e tiew r ap fo r
cable s t r ai n r elief.