3-105
CHAPTER 3 Settings and Measurement
(5) Interface settings
This menu is used to specify conditions for PC connection.
Setting
Selection available
End-of-line character
Set the end-of-line character for sending and
receiving the control commands.
CR + LF, CR, LF
USB
settings
USB ID
Set the identification ID when connecting
between PC and USB.
0 to 9
TCP-IP
settings
TCP/IP
Detailed
IPAddr Auto Acq.
Set the IP address automatic acquisition.
On, Off
IP Address
Set the IP address.
0 to 255 . 0 to 255 . 0 to 255 . 0 to 255
* When the IP address is set automatically, the
automatically set IP address is displayed.
Sub-net mask
Set the subnet mask.
0 to 255 . 0 to 255 . 0 to 255 . 0 to 255
* When the IP address is set automatically, the
automatic sub-net mask is displayed.
Port number
Set the port number of the control command
server.
1024 to 65535
* This is the port number specified when
connecting our application (GL980-2000_APS).
Gateway
Set the gateway.
0 to 255 . 0 to 255 . 0 to 255 . 0 to 255
* When the IP address is set automatically, the
automatic gateway address is displayed.
DNS address
Set the address of the DNS server.
0 to 255 . 0 to 255 . 0 to 255 . 0 to 255
* When the IP address is set automatically, the
automatic DNS server address is displayed.
Keep Alive
Set the forced disconnection time when no
communication is detected by the control
command server.
Off, 10 seconds, 30 seconds, 1 minute, 10
minutes, 30 minutes, 1 hour
Apply Settings
Confirm TCP/IP settings and restart TCP/IP
processing.
FTP/WEB
server
settings
FTP Client
Perform the FTP connection settings for backup
destination.
For details, refer to "FTP/WEB server setting".
FTP server port number
Set the port number of the FTP server installed in
this device.
0 to 65535
WEB server port number
Set the port number of the WEB server installed
in this device.
0 to 65535
settings
E-mail Send
Settings
Destination
settings
To
Set the destination (address) of the E-mail.
Enter the string of up to 63 characters.
CC1 to CC3
Set the destination of the E-mail (broadcast 1 to
3).
Enter the string of up to 63 characters.
Subject
Set the subject of the E-mail.
Enter the string of up to 63 characters.
