3-54
CHAPTER 3 Settings and Measurement
(2) Capturing
Capture destination and file name
Elapsed time
The remaining capacity of SD card
(Remaining time more than 99999 hours is
displayed as "++++:++:++" .)
The captured data is saved in the Internal RAM, internal memory, SD card or USB memory during data
capture.
You can not use the [MENU] key to change the setting.
Operations available during capture
SPAN/TRACE/POSITION change
Change the settings with the [SPAN/TRACE/POSITION] key.
Screen display mode switch
Change the screen mode with the [DISPLAY] key.
Replay while capturing
Replay the data captured while capturing
Save to device
Save to the device with the [FILE] key during data capture.
Setting check
Display the setting information with the [MENU] key.
Time axis change
Change the time axis with the [TIME/DIV] key.
(3) Data replay during capturing
Displays the voltage at a point
indicated by Cursor A or B or the
selected cursor .
Displays the measurement time at a
point indicated by Cursor A or B or the
selected cursor .
The captured data while capturing can be replayed by pressing the [REVIEW] key.
Use the Direction keys ( ) to move the cursor and captured data to check digital values.
Operations available during capturing
Cursor movement
The [CURSOR] key is used to switch between cursors A and B.
The or , keys are used to move the cursors.
Save to device
Recording save can be performed from the [FILE] menu.
(The data up to the present or between the cursors can be saved in a
separate file during data capture.)
Screen copy
Copy the screen with the [FILE] key.
Time axis change
Change the time axis with the [TIME/DIV] key.
•
During ring capturing, the replay cannot be performed while capturing .
•
During relay capturing, the data cannot be saved to a device .
•
During relay capturing, the replay cannot be performed before the file is switched while capturing.
