GRANDVIEW ENGINEERING SOLUTIONS, LLC
Connect using Cellular
To connect the Grandview RemoteConnect to your PC using Cellular:
1 Confirm the Power LED is illuminated blue on the Grandview RemoteConnect.
—If not, refer back to the “Connect the Grandview RemoteConnect to a Vehicle” section.
2 Confirm the LTE LED is blinking blue on the Grandview RemoteConnect.
3 Confirm that your PC has internet connectivity.
4 Contact Grandview Engineering Solutions (the first time only) to configure your PC for communications with your
Grandview RemoteConnect device.
—If not, refer back to the “Pairing Grandview RemoteConnect with PC” section.
5 Use the [Vendor] drop-down of the Adapter setting to select “Grandview Engineering Solutions (GES32)”.
6 Use the [Device] drop-down of the Adapter setting to select “Cellular”.
7 Click [Apply Changes].
The Grandview
Discovery
tool will automatically appear.
7 Click the only Grandview RemoteConnect device that should appear in the list.
8 Click the [Select] button.
Grandview RemoteConnect
Owner’s Manual
Page
!
of
!
22
26
