GRANDVIEW ENGINEERING SOLUTIONS, LLC
CONNECT THE GRANDVIEW REMOTECONNECT TO A VEHICLE
Once you have installed the Grandview RemoteConnect drivers, you are ready to connect to a vehicle using the
DB15M/Green 9-Pin + Blue 9-Pin Deutsch adapter cable.
Connect using Bluetooth, WiFi or Cellular
1 Connect the DB15 male end of the appropriate adapter cable to the Grandview RemoteConnect.
2 Attach the Deutsch connector end of the cable to the vehicle’s diagnostic connector.
3 Key ON the vehicle.
ℹ
The vehicle’s diagnostic connector is typically located under the dashboard on the driver’s side, or beside
the driver’s seat. It can also be located in the engine compartment, near the electronic control unit (ECU).
⚠
Vehicle battery power is required to power the Bluetooth, WiFi and cellular radios.
4 Wait for the Grandview RemoteConnect to establish connection with the network.
ℹ
The LTE light will start blinking once cellular connectivity has been established. This typically takes
between 15 and 30 seconds.
DB15M/Green 9-pin + Blue 9-Pin Deutsch Cable
Grandview RemoteConnect
Owner’s Manual
Page
!
of
!
18
26
