GRANDVIEW ENGINEERING SOLUTIONS, LLC
Grandview Engineering Solutions, LLC retains all ownership rights to Grandview RemoteConnect and its
documentation. The Grandview RemoteConnect source code is a confidential trade secret of Grandview
Engineering Solutions, LLC. You may not decipher or de-compile Grandview RemoteConnect, develop source
code for Grandview RemoteConnect, or knowingly allow others to do so. The Grandview RemoteConnect and its
documentation may not be sub-licensed or transferred without the prior written consent of Grandview Engineering
Solutions, LLC.
This manual, as well as the software it describes, is furnished under license and may only be used or copied in
accordance with the terms of such license. The content of this manual is furnished for informational use only, is
subject to change without notice, and should not be construed as a commitment by Grandview Engineering
Solutions, LLC. Grandview Engineering Solutions, LLC assumes no responsibility or liability for any errors or
inaccuracies that may appear in this manual.
Except as permitted by such license, no part of this publication may be reproduced, or transmitted, in any form or
by any means, electronic, mechanical, or otherwise, without the prior written permission of Grandview Engineering
Solutions, LLC.
Grandview RemoteConnect is a trademark of Grandview Engineering Solutions, LLC.
©2019 Grandview Engineering Solutions, LLC. All rights reserved. All other marks are trademarks or registered
trademarks of the respective holders. Pictures for illustration purposes only. Specifications are subject to change
without notice.
Grandview RemoteConnect
Owner’s Manual
Page
!
of
!
2
26
