Grandstream Networks, Inc.
DP715-US/DP710-US User Manual
Page
30 of 43
Firmware 0.0.0.8
Last Updated: 03/2012
Table 8: Status Page
MAC Address
The device ID, in HEX format. This is very important ID for ISP troubleshooting. The Mac
address will appear in this place. The MAC address will be used for provisioning and can
be found on the label coming with original box and on the label located on the bottom
panel of the device.
RFPI Address
IP Address
This field shows the IP address of the DP715.
Product Model
This field contains the product model info.
Hardware Version
This field shows the hardware revision of the unit and the part number.
Software Version
Program:
This is the main software release.
This number is always used for firmware
upgrade.
Current release is 1.0.0.18 Boot and Loader are seldom changed.
Bootloader:
current version is 1.0.0.6.
Core:
current version 1.0.0.18
Base:
current version is 1.0.0.18
System Up Time
Shows system up time since the last reboot.
PPPoE Link Up
Indicates whether the PPPoE connection is up if the DP715 is connected to DSL modem.
NAT
This filed indicates the type of NAT connection used by the DP715.
SIP Account
Registration Status:
Handset Status
A
DVANCED
U
SER
C
ONFIGURATION
Log in to the advanced user configuration page the same way as for the basic configuration page. The
password is case sensitive and the factory default password for Advanced User is “
admin
”.
Advanced User configuration includes the end user configuration and the advanced configurations including:
a) SIP configuration, b) Codec selection, c) NAT Traversal Setting and d) other miscellaneous configuration.
DP715 has two (2) profiles for the four (5) Handset DP710.
