Grandstream Networks DP710 US, Руководство пользователя

Страница: 23 / 44

Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 23 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
- always check
- check when pre/suffix changes
- never upgrade
18 Subscription Mode Press "9" to toggle subscription mode on the base. Subscription
mode is automatically exited after 120 seconds.
47 “Direct IP Calling” Enter the target IP address to make a direct IP call, after dial tone.
(See “
Make a Direct IP Call ”.)
86 Voice Mail Number of Voice Mails
99 “RESET” Press “ 9 ” to reboot the device
Enter MAC address to restore factory default setting
(See
Restore Factory Default Setting section)
“Invalid Entry” Automatically returns to main menu
“Device not registered” This prompt will be played immediately after off hook If the device is
not register and the option “Outgoing Call without Registration” is in
NO
Five Success Tips when using the Voice Prompt
1. “*” shifts down to the next menu option
2. “#” returns to the main menu
3. “9” functions as the ENTER key in many cases to confirm or toggle an option
4. All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP
address. For IP address, add 0 before the digits if the digits are less than 3 (i.e. - 192.168.0.26
should be key in like 192168 00 0 0 26. No decimal is needed).
5. Key entry cannot be deleted but the phone may prompt error once it is detected
Call Features
D
IRECT
IP C
ALLS
Direct IP calling allows two parties, that is, a Handset and another VoIP Device, to talk to each other in an
ad hoc fashion without a SIP proxy.
Elements necessary to complete a Direct IP Call:
1. Both DP715_US, and other VoIP Device, have public IP addresses, or
2. Both DP715_US and other VoIP Device are on the same LAN using private IP addresses, or
3. Both DP715_US and other VoIP Device can be connected through a router using public or private
IP addresses (with necessary port forwarding or DMZ).
DP715 supports two ways to make Direct IP Calling:
Using IVR
1. Pick up the Handset and press then access the voice menu prompt by dial “ *** ”
2. Dial “ 47 ” to access the direct IP call menu
3. Enter the IP address after the dial tone and voice prompt “Direct IP Calling”