Grandstream Networks, Inc.
DP715-US/DP710-US User Manual
Page
13 of 43
Firmware 0.0.0.8
Last Updated: 03/2012
H
ANDSET
-
SETTINGS AND OPERATION
T
URNING THE HANDSET
ON/OFF
1. Press the off-button to turn the handset on.
2. To switch the handset off, press and hold the off-key until the handset switches off.
R
EGISTERING A
H
ANDSET TO THE
DECT
B
ASE
S
TATION
Up to 5 handsets can be registered to one base station. Each handset can, for its part, be registered to up
to four base units and the user can choose which base unit he wishes to use. In the default setting as
supplied, each handset is registered as Handset 1 to Base unit 1.
1. The base station has to be restarted or you must enable the Subscription mode on it. Unplug the base
station power supply and plug it back in again or enable the Subscription mode.
Registration mode on the base unit is now activated for approximately 2 minutes. You must work through
the following steps to register a handset:
2. Press .
3. Press or
repeatedly, select
Handset
4. Press
to confirm.
5. Press or
repeatedly, select
Registration
.
6. Press to confirm.
7. Select ‘
Register’
and press .
8. Select the base unit (1-4) desired using or and press .
9. Enter the base unit PIN (System PIN; default: 0000) and press
.
10.Restart base appears in the display.
11.The handset will now search for the base unit and register when it has found it. The display shows
standby mode after a successful registration and the handset name and handset number appear.
Note:
It is not possible to make or receive calls while the base unit is in registration mode.
“O
UT OF RANGE
”
WARNING
When the handset is out of range of the base unit during communication:
• Searching appears in the display and the icon flashes in the display.
• Move closer to the base unit.
• The no longer flashes and is shown steadily.
• You are back within the base unit's range.
