Grandstream Networks, Inc.
DP715-US/DP710-US User Manual
Page
26 of 43
Firmware 0.0.0.8
Last Updated: 03/2012
*50
Disable Call Waiting
(for all subsequent calls)
*51
Enable Call Waiting
(for all subsequent calls)
*67
Block Caller ID
(per call). Dial “*67” + ” number ”.
No
dial tone is played in the middle.
*82
Send Caller ID
(per call). Dial “*82” + ” number ”.
No
dial tone is played in the middle.
*69
Call Return Service:
Dial *69 and the phone will dial the last incoming phone number received.
*70
Disable Call Waiting
(per call). Dial “*70” + ” number ”.
No
dial tone is played in the middle.
*71
Enable Call Waiting
(per call). Dial “*71” + ” number ”.
No
dial tone is played in the middle.
*72
Unconditional Call Forward:
Dial “*72” and then the forwarding number followed by “#”. Wait for
dial tone and hang up. (dial tone indicates successful forward)
*73
Cancel Unconditional Call Forward.
To cancel “Unconditional Call Forward”, dial “*73”, wait for
dial tone, then hang up.
*74
Enable Paging Call:
Dial “*74” and then the destination phone number you want to page.
*78
Enable Do Not Disturb (DND):
When enabled all incoming calls are rejected.
*79
Disable Do Not Disturb (DND):
When disabled, incoming calls are accepted.
*87
Blind Transfer
*90
Busy Call Forward:
Dial “*90” and then the forwarding number followed by “#”. Wait for dial tone
then hang up.
*91
Cancel Busy Call Forward.
To cancel “Busy Call Forward”, dial “*91”, wait for dial tone, then
hang up.
*92
Delayed Call Forward.
Dial “*92” and then the forwarding number followed by “#”. Wait for dial
tone then hang up.
*93
Cancel Delayed Call Forward.
To cancel Delayed Call Forward, dial “*93”, wait for dial tone,
then hang up.
Flash/Hook
(Recall)
Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook
will switch to a new channel for a new call.
#
Pressing pound sign will serve as
Re-Dial
key.
B
ASE
S
TATION
-
C
ONFIGURATION
G
UIDE
C
ONFIGURING THE BASE STATION THROUGH
V
OICE
P
ROMPTS
DHCP
M
ODE
Select voice menu option 01 to enable DP715 to use DHCP.
STATIC
IP
M
ODE
Select voice menu option 01 to enable DP715 to use STATIC IP mode, then use option 02, 03, 04, 05 to
set up IP address, Subnet Mask, Gateway and DNS server respectively.
F
IRMWARE
S
ERVER
IP
A
DDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C
ONFIGURATION
S
ERVER
IP
A
DDRESS
Select voice menu option 14 to configure the IP address of the configuration server.
U
PGRADE
P
ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
