![background image](http://html1.mh-extra.com/html/graco/reactor-e-8p-3a1602h/reactor-e-8p-3a1602h_instructions-parts-manual_2253523019.webp)
Setup
3A1602H
19
Fill Wet-cups
Keep the felt washers in the pump wet-cups saturated
with Graco ISO pump oil, Part No. 217374. The lubricant
creates a barrier between the ISO and the atmosphere.
Fill wet-cups through the slots in the plate, or remove a
screw and swing the plate to the side.
Install Pail Heaters
If the material viscosity at room temperature is greater
than 2000 centipoise the pump may not siphon feed
on-ratio. Purchase and install the optional flexible pail
heaters so the material can be warmed, resulting in a
lower viscosity and enabling the pump to properly
siphon feed. See
Accessories
on page 55.
Install and operate according to the included pail heater
manufacturer’s installation manual.
Recirculate Material
The standard system circulates material from the fluid
manifold back to the supply container. To circulate
material from the gun back to the material supply con-
tainer, purchase and install Hose Recirculation Kit
24M654. See
Install Optional Recirculation Kit
on
page 15.
1.
Insert inlet tubes into pails. See
Connect Fluid Inlet
Tubes
, page 21.
2.
Set function knob to Stop/Park.
3.
Plug in power cord.
4.
Turn on power.
5.
Set the Recirc/Spray valves to Recirc.
The pump rod and connecting rod move during
operation. Moving parts can cause serious injury
such as pinching or amputation. Keep hands and
fingers away from the wet-cup during operation. Shut
off power before filling the wet-cup.
F
IG
. 11: Fill Wet Cup
Follow all warnings and instructions from both the
fluid manufacturer technical data sheet and the pail
heater installation manual.
Slots
TI17124a
F
IG
. 12
F
IG
. 13
F
IG
. 14
+
-
TI17127b
I
O
I
O
TI17134a
TI17133a
Содержание Reactor E-8p 3A1602H
Страница 16: ...Setup 16 3A1602H 12 Install fluid tubes 36...
Страница 36: ...Repair 36 3A1602H FIG 56 Function Knob Potentiometer ti17465a 10 61 12 16a 23 22 87 16 N S P...
Страница 40: ...Repair 40 3A1602H FIG 59 Pressure Transducer Connection 35 ti17467a 33...
Страница 56: ...Dimensions 56 3A1602H Dimensions 34 58 in 87 8 cm 24 12 in 61 3 cm 15 06 in 38 3 cm TI17120a...