Setup
3A1602H
13
Setup
Location
•
The Reactor E-8p should always be used on a level
surface.
•
Do not expose the Reactor E-8p to rain.
Electrical Requirements
•
Required power source: single dedicated circuit that
is rated at a minimum of 15A.
NOTE:
Cords must be 3-conductor grounded, rated for
your environment.
•
Power cord connector (120V):
One NEMA 5-15T
•
Power cord connector (240 V):
One IEC 320, with two local adapters
Euro CEE74 Adapter
Australia/China Adapter
•
Extension cord requirements:
Grounding
Reactor E-8p:
grounded through power cord.
Generator (if used):
follow your local code and manu-
facturer’s recommendations. Start and stop the genera-
tor with power cord(s) disconnected.
Spray gun:
ground through connection to a properly
grounded fluid hose and grounded Reactor E-8p. Do not
operate without at least one grounded fluid hose.
Fluid supply container:
follow local code.
Object being sprayed:
follow local code.
Solvent pails used when flushing:
follow local code.
Use only conductive metal pails, placed on a grounded
surface. Do not place the pail on a nonconductive sur-
face, such as paper or cardboard, which interrupts
grounding continuity.
To maintain grounding continuity when flushing or
relieving pressure:
hold metal part of the spray gun
firmly to the side of a grounded metal pail, then trigger
the gun.
Improper wiring may cause electric shock or other
serious injury if work is not performed properly. Have
a qualified electrician perform any electrical work. Be
sure your installation complies with all National, State
and Local safety and fire codes.
Required Wire Size
Up to 50 ft (15 m)
Up to 100 ft (30 m)
AWG 14
AWG 12
The equipment must be grounded. Grounding
reduces the risk of static and electric shock by
providing an escape wire for the electrical current due
to static build up or in the event of a short circuit.
Содержание Reactor E-8p 3A1602H
Страница 16: ...Setup 16 3A1602H 12 Install fluid tubes 36...
Страница 36: ...Repair 36 3A1602H FIG 56 Function Knob Potentiometer ti17465a 10 61 12 16a 23 22 87 16 N S P...
Страница 40: ...Repair 40 3A1602H FIG 59 Pressure Transducer Connection 35 ti17467a 33...
Страница 56: ...Dimensions 56 3A1602H Dimensions 34 58 in 87 8 cm 24 12 in 61 3 cm 15 06 in 38 3 cm TI17120a...