Graco 234129, Инструкция по эксплуатации

Страница: 20 / 108

Installing Fluid Metering Assembly
20 309738L
Installing Fluid Metering Assembly
To install the fluid metering assembly hardware:
• Install the PrecisionFlo LT fluid metering assembly.
• Connect the PrecisionFlo LT fluid metering assembly
to the control assembly.
• Connect fluid lines and cables.
Installing the Fluid Metering Assembly
Preparing to Install the Assembly
Before installing the fluid metering assembly:
• See component manuals for specific data on compo-
nent requirements. Data presented here pertains to
the PrecisionFlo LT fluid metering assembly only.
• Have all system and subassembly documentation
available during installation.
• Be sure all accessories are adequately sized and
pressure-rated to meet the system's requirements.
• Use only the Graco PrecisionFlo LT fluid metering
assembly with the PrecisionFlo LT control assembly.
Installing the Assembly
1. Select a location for the PrecisionFlo LT fluid meter-
ing assembly. Keep the following in mind:
• Allow sufficient space for installing the equipment.
• Make sure all fluid lines, cables and hoses easily
reach the components to which they will be con-
nected.
• Make sure the fluid metering assembly allows the
automation unit to move freely along all axis.
• Make sure the fluid metering assembly provides
easy access for servicing its components.
2. Locate and secure the PrecisionFlo LT fluid meter-
ing assembly to the automation unit (or other mount-
ing surface) with appropriate size bolts through the
0.42 in. (10.7 mm) diameter holes in the base plate.
See the mounting dimensions in
Table 1 - Measure-
ment, inches (mm) and F
IG
. 8.
Table 1 - Measurement, inches (mm)
WARNING
Read Warnings, page 6.
WARNING
Read Warnings, page 6.
A 16.0 (407)
B 15.0 (381)
C
11.0 (280)
D
8.0 (204)
F
IG
. 8
"
"
A
B
D
C