Graco 234129, Инструкция по эксплуатации

Страница: 25 / 108

PrecisionFlo LT Module Operation
309738L 25
PrecisionFlo LT Module Operation
Reading PrecisionFLo LT Control / Indicators
Table 2 - PrecisionFlo Buttons/Switches
Table 3 - PrecisionFlo LT Indicators
Table 4 - PrecisionFlo Indicator Lights
F
IG
. 11
7
6
4
3
1
2
Ref Button/Switch What it Does
4 Sealer Stop Button • Disables all air solenoids and V/P regulators.
• Signals the external controller that a SEALER STOP condition is in effect.
6 Run/Setup Mode Key
Switch • Turn key switch counter-clockwise to set control unit to Run Mode. When the
key is in Run Mode or removed, you can operate and monitor the system.
• Turn key switch clockwise to set control unit to Setup Mode (for software con-
figuration). The key cannot be removed while turned to Setup Mode.
7 Main Electrical Power
(Disconnect) Switch • Turns on power to system.
• Lights Condition Light(s).
Ref Indicator Indicator
light
Meaning
1 User Display On Display is on when power is applied to the control assembly.
Off Display is off when power is removed from the control assembly or
the screen saver is active. Press any key to activate the screen.
Dispenser Ready
Light (Ref 2) Status Fault Present Light
(Ref 3) Status
Off Off No System Power or the system is in manual mode with no fault
present.
On Off System is in auto mode with no fault present.
On On System is in auto mode with a minor fault present.
Off On System is in auto or manual mode with a major fault present or
the system is in manual mode with a minor fault present.