76343/4/5 | English, Revision 05 | Date: 23.02.2022
38
Chapter 5 – Parameter Setting via the Web Interface
5.1.4 Serial1
This section shows the current state of the serial Port.
Figure 30
Web interface: Serial1 Status Information
Table 23
Web interface: Serial1
Entry
Note
State
Shows whether the serial port is active
Device
This specification refers to the hardware interface of
the serial port. The normally used processor internal
device is:
/dev/ttymxc0
If a compatible USB <–> serial adapter is connected
the following declarations like
/dev/ttyUSB0 (1,...)
are also possible
Network Connection
The configured port mode is shown here followed by
the current state of the connection with IP and port of
the connected device, e.g.
Mode: 'TCP-Server'
IP: 0.0.0.0:0 (Listen Port 8888)
Baudrate
Parity
Databits
These are the currently configured parameters of the
serial interface.
Serial Tx Frames/Bytes
Serial Rx Frames/Bytes
Network Tx Frames/Bytes
Network Rx Frames/Bytes
Net->Uart: Bytes in Buffer
Uart->Net: Bytes in Buffer
These values shown here, inform us how many bytes
or data packets via the serial port has been sent or
received.