76343/4/5 | English, Revision 05 | Date: 23.02.2022
103
Statements and instructions according to FCC and Industry Canada Rules – Chapter 15
15.1 Information for host integrators of the radio module
CAUTION:
Host integrators are still responsible for testing their end product for any
additional compliance requirements required with this module installed (for exam
-
ple, digital device emissions, PC peripheral etc.). In the event that these conditions
can not be met (for example certain laptop configurations or co-location with anoth
-
er transmitter), then the FCC authorization is no longer considered valid and the FCC
ID can not be used on the final product. In these circumstances the host integrator
will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
15.1.1 Labelling instructions for host devices
The FCC and IC ID are permanently fixed on a label on the module, and, if the iden
-
tification numbers are not visible when the module is installed inside another device,
then the outside of the device into which the module is installed must also display a
label referring to the enclosed module. This exterior label can use wording such as
the following:
Contains Transmitter Module FCC ID: RYK-WPEA-121N
Contains Transmitter Module IC: 6158A-WPEA121NW
Any similar wording that expresses the same meaning may be used.
Additionally the following two part statement must be fixed on the host device:
This device complies with Part 15 of the FCC Rules. Operation is sub
-
ject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
15.1.2 RF Exposure / collocation requirements
The fixed external antennas used for this mobile transmitter must provide a separa
-
tion distance of at least 20 cm from all persons and must not be co-located or oper
-
ating in conjunction with any other antenna or transmitter.
15.1.3 Information to end user
End users may not be provided with the module installation instructions. For infor
-
mation to users, all relevant instructions that pertain to all components of a compos
-
ite device are required. For example, Class A or Class B statements in Section
15.105; all warning statements and special instructions as required by Sections
15.21 and 15.27; and all Part 18 applicable instructions / attestations must be clearly
stated. However, realistic variations in editing to clarify the language and structure
are permitted as long as all the relevant points applicable to all of the components
are represented.
Statements and instructions according
to FCC and Industry Canada Rules
15
