Instructions for use and connection
46
−
meat probe temperature display
(d4-6a);
−
meat probe temperature setting display (end
of oven operation)
(d4-6b);
−
selection sensor value setting 4
(4a, 4b)
5
ON/OFF sensor; signal lamp (red)
(5a);
blockage of operation display – activation by
simultaneous pressing of 1 and 2 for
approximately 5 seconds
(d6).
General settings
•
Sound signal volume
−
When no other function is active it is possible
to set the sound signal volume by touching
the sensor
(4b).
The display
(d4-6)
indicates
symbols of 4 volume levels.
•
Sound signal duration:
−
oven operation period sound signal
(d4-1),
end of oven operation
(d4-2)
and meat probe
(d4-3)
last 7 minutes;
−
alarm timer sound signal
(d4-4)
lasts 3
minutes
−
After the expiry of indicated time the sound
signal goes off automatically.
•
Each proper touch of sensor is
accompanied by a beep
.
•
Changing the value setting speed
The value setting speed is doubled after 5
seconds of continuous sensor pressing.
•
Simultaneous pressing of (-) and (+)
sensors (3a/3b) ali (4a/4b)
Resets the settings to “0”, except for the
temperature setting display
(d3-1)
which is
changed to 30°C, and the end of operation
sensor
(d4-2)
which changes to indicate the
time of day.
In case the ON/OFF sensor
(5)
is not pressed
within 5 seconds, all settings are reset
automatically, except for the time of day and the
alarm timer.
In case of eventual power failure which is less
that 1 minute long, all settings remain
unchanged and the oven resumes normal
operation (if activated).
(1)
(1a)
(2a)
(2)
(3a)
(4a)
(5a)
(3b)
(4b)
(5)
(d4-3)
(d3-1)
(4)
(d6)
(d1)
(d2)
(d4-6)
(d4-6a)
(d4-6b)
(d4-5)
(d4-1)
(d4-4)
(d4-2)
(d3-2)
Use of oven
Alternatives with the oven on:
Changing or setting the oven temperature
(d3-1)
•
Changing or setting oven operation time
(d4-1)
Changing or setting end of oven operation
(d4-2)
•
Changing or setting meat probe temperature
(d4-3)
if the meat probe is connected
Alternatives with the oven off:
•
By using the food selection sensor
(1)
or mode
selection sensor
(2)
you may select the type of
food
(1)
or function mode
(2),
and you may
change or set the oven temperature
(d3-1),
oven operation time
(d4-1),
end of oven
operation
(d4-2),
meat probe (if the type of food
or function mode had been selected before)
(d4-3)
alarm timer
(d4-4)
and the time of day
(d4-5).
•
changing or setting the alarm timer and the
current daily time
(d4-4).
Setting the time of day
•
After the appliance is connected to the mains
the display
(d4-6)
flashes
»12.00«
and the
symbol
(d4-5).
•
By touching the sensors
(4a/4b)
you may set
the exact daily time (approximately 5 seconds
after the setting is finished the symbol
(d4-5)
