Gorenje Aqua ECOLOGIC, Инструкция по использованию, техническому обслуживанию и монтажу, Страница: 81 / 112

ECOLOGIC 30 | instructions for use, maintenance and installation | June 2015
29
He a t
UP
In ignition phase, when the dosing screw filled the firebox, spark plug heats
pellets to ignition.
Fu e l
IGNI
After Heat up phase, the boiler ignites pellets. No dosing in this phase.
TST
IGNI
At the end of ignition phase, the boiler shuts off the spark plug and tests, if the
ignition was successful and if combustion is correct and temperatures rise
correctly.
BURN
1 2 3 °
Burning phase (normal work phase). Lower display shows temperature of smoke
gases at exit from the boiler.
BURN
B78°
Burning phase. Lower display shows water temperature in the boiler.
BURN
R48°
Burning phase. Lower display shows temperature of return water.
P5D5
R48°
Burning phase. Upper display shows current power of the boiler (Px) and set
power of the boiler (Dx).
CL N
FIRE
Cleaning phase. Fans blow out ash and other residues from the firebox. This
phase starts automatically from time to time during burning phase.
FIRE
STOP
The boiler is in stopping sequence and is cooling down.
COOL
FL UID
When water temperature in the boiler, even with minimum power, reaches set
temperature, the boiler enters phase COOL FLUID and cools down. The boiler
restarts automatically when the water in the boiler cools down under set value.
AL AR
PEL
Lack of pellets in burning phase.
AL AR
FIRE
Unsuccessful ignition. Check boiler status, clean firebox and try to reignite the
boiler.
AL AR
SEC
Thermal safety activated. Check boiler status and, if no anomalies are
determined, manually reactivate safety and restart the boiler, or contact the
service centre.
AL AR
PRES
Safety pressure control activated. Check boiler status and, if no anomalies are
determined, restart the boiler, or contact the service centre.