Goodway HPW-1000, Инструкция по эксплуатации и техническому обслуживанию

Страница: 32 / 37

Problem Probable Causes Remedy
Burner will If green signal light is not on:
not ignite Switch in cold wash position Switch to hot
wash position
Flow switch or temperature Replace flow
sensor failed switch or
temperature
sensor
Black smoke
Burner nozzle worn Replace nozzle
from burner High elevation Consult factory
Bad fuel Replace with clean
fuel after cleaning
fuel tank
White/gray
Bad fuel Replace with clean
smoke from fuel after cleaning
burner fuel tank
Clogged fuel nozzle Clean nozzle
Inlet oil line air leak Locate and repair
leak
Bad igniter Replace igniter
Burner inlet air wrong Adjust inlet air
(this is the last
thing to be done)
Pump makes
Insufficient water supply Check water flow
knocking rate to the unit
sound Must be greater.
than machine
rating
31
31