background image

MODELS  

HPW-1000, HPW-2000 & HPW-2000-3  

ELECTRIC POWERED 

 

SAVE THESE INSTRUCTIONS 

GROUNDING INSTRUCTIONS

 

This product must be grounded.  If it should malfunction or break 
down, grounding provides a path of least resistance for the electric 
current to reduce the risk of electric shock.  This product is 
equipped with a cord having an equipment-grounding conductor 
and a grounding plug.  The plug must be plugged into an 
appropriate outlet that is properly installed and grounded in 
accordance with all local codes and ordinances. 

DANGER

 - Improper connection of the equipment-grounding 

conductor can result in a risk of electrocution.  Check with a 
qualified electrician or service personnel if you are in doubt as to 
whether the outlet is properly grounded.  Do not modify the plug 
provided with the product - if it will not fit the outlet, have a 
proper outlet installed by a qualified electrician.  Do not use any 
type of adapter with this product. 

 

EXTENSION CORDS 

 

Use only 3-wire extension cords that have 3-prong grounding-type 
plugs and 3-pole cord connectors that accept the plug from the 
product.  Use only extension cords that are intended for outdoor 
use.  These extension cords are identified by a marking 
"Acceptable for use with outdoor appliances; store indoors while 
not in use."  Use only extension cords having an electrical rating 
not less than the rating of the product.  Do not use damaged 
extension cords.  Examine extension cords before using and  

Содержание HPW-1000






































Отзывы: