Goodway HPW-1000, Инструкция по эксплуатации и техническому обслуживанию

Страница: 28 / 37

1. Release the trigger to stop the spray action and engage the
trigger lock.
2. Pull back the locking collar to release the nozzle.
3. Insert another nozzle until the locking collar snaps into place.
CAUTION: NOZZLES MAY BE HOT.
SOAP OR CHEMICAL APPLICATION
1. Place the strainer end of the siphon hose into your container of
premixed chemical solution. The siphon injector draws at a
rate of 1 part chemical to 8 parts water when the soap valve is
wide open. Dilute your chemical, if necessary, to the proper
level to obtain the final ratio recommended by the chemical
manufacturer. ALWAYS USE LIQUID CONCENTRATES
TO PREVENT CLOGGING THE SIPHON INJECTOR.
2. Chemicals are applied at low pressure and are drawn through
the water system of the machine. Application is controlled by
the valve on the wand. Turning the T-handle on the left side of
the wand counter clockwise (or away from you) will start and
gradually increase the chemical draw. Turning the handle
clockwise (or towards you) will decrease and eventually shut
off the chemical draw. It takes several seconds for the
chemical to travel through the boiler coil and high-pressure
hose to the nozzle. Chemical application is not instantaneous
and chemical spray continues for several seconds after
switching to high pressure.
27
27