Goodway HPW-1000, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 37

ELECTRIC MOTOR
The HPW-1000 is powered by a 1.5 HP (1.1 kW), 115 V, 60 HZ,
single phase electric motor. The HPW-2000 is powered by a 3 HP
(2.2 kW), 220 V, 60 HZ, single phase electric motor. The HPW-
2000-3 is powered by a 5 HP (3.7 kW), 220 V, 60 HZ, three phase
electric motor. The HPW-1000 and HPW-2000 are equipped with
thermal overload protection. The motor drives a three-plunger oil
bath pump. Should the motor overheat, the thermal overload will
cut off power to the motor. The overload is manually reset. The
reset button is located on the side of the motor.
ALWAYS
DETERMINE AND CORRECT THE CAUSE OF THERMAL
OVERLOAD BEFORE USING THE MACHINE AGAIN.
NOTE: The HPW-2000-3 is not equipped with thermal overload
protection.
ABOUT THE OIL BURNER/BOILER
These units are equipped with an oil-fired boiler, which can be
fired on #1 or #2 fuel oil or diesel fuel. Kerosene is not
recommended. Most burner service can be performed locally by a
qualified oil burner service technician.
NEVER REMOVE THE BURNER HOUSING FROM THE
UNIT AS DAMAGE TO THE BOILER INSULATION WILL
RESULT. ALL BURNER SERVICE CAN BE PERFORMED
WITH THE BURNER HOUSING IN PLACE.
WARNING: NEVER PUT GASOLINE IN THE BURNER
FUEL TANK.
WARNING: DO NOT WRAP HOSES OR ELECTRICAL
CORDS AROUND THE BOILER HOUSING. DAMAGE
AND SERIOUS INJURY MAY RESULT
6
6