39
You can use this connection if you have a converter with your cable system.
You can record any basic (non-scrambled) channel or premium (scrambled)
channel, which you subscribe to, and watch that channel.
Your Dual-Deck VCR can be turned off during normal TV viewing.
To record and view a basic or premium channel, follow these instructions.
①
Turn on your TV, Dual-Deck VCR, and converter.
②
Use the Ch
Up/Down
buttons to set your Dual-Deck VCR to channel
2, 3 or 4, whichever is used by your cable system. You may view this
channel selection on the
Front Panel Display
of your Dual-Deck
VCR.
③
Set the Dual-Deck VCR back panel switch to either channel 3 or 4,
choosing one that is not broadcast in your area.
④
Set your TV tuner to the same channel used in
③
above.
▲
The above instructions apply when your Dual-Deck VCR is on. If you wish to
view your cable system when your Dual-Deck VCR is off, set your TV tuner to
channel 2, 3 or 4, whichever is used by your cable system.
▲
⑤
On the cable system converter, select the channel to view or record.
Start the recording (see page 15). Make sure the converter is left on
during the recording.
VHF/UHF
CABLE
OUTLET
DUAL-DECK VCR BACK PANEL
TV BACK PANEL
Dual-Deck
VCR Cable
(supplied)
Coaxial Cable
CONVERTER
IN
OUT
VIDEO
R L
AUDIO
OUT TO TV
IN FROM ANT
MONITOR
OUT
CH4
CH3
THIS DEVICE COMPLIES WITH FCC RULES PART 15.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE AND, (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE THAT MAY BE
RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
C A U T I O N
R i s k o f E l e c t r i c a l S h o c k
D O N O T O P E N
AV I S
R i s q u e d e C h o c E l e c t r i q u e
N E PA S O U V R I R
Cable
Connection 2
