GLP Highlander Wash, Быстрый старт и руководство по безопасности

Страница: 26 / 36

www.glp.de
26
Highlander Wash Quick Start and Safety Manual
Reset the lamp hours counter using the control panel (see the fixture’s User Manual
available for download from www.glp.de).
Carry out lamp adjustment as described below.
Adjusting the lamp
With the lamp door closed and
fastened with its locking screw,
apply power to the fixture.
The back of the head and lamp
door will now become hot. Do
not touch them, or you may burn
yourself.
Aim the fixture directly at an
even, light-colored surface.
See Figure 9. The fixture has three
lamp adjustment screws
(arrowed). Each screw tilts the
lampholder assembly in the
direction of the screw. Turn the
screws to adjust the lampholder
position and obtain the most even projection.
Main fuse
See Figure 10 on right and see ‘Overview’ on page
13. The main fuse sits in a fuseholder in the base.
If the fixture appears to be completely shut down
even though power is applied, the main fuse may
have blown. Disconnect the fixture from power
before replacing the fuse. You can open the
fuseholder with a flat-headed screwdriver. Replace
only with a fuse of the same type and rating.
If the fuse blows repeatedly, disconnect the fixture
from power and contact GLP for service and
repair.
Lubrication
The fixture does not normally need lubrication. If any effects or moving parts show signs
of rough movement, consult a GLP service partner.
GLP Service and Support
Contact information for the nearest GLP service and support is available online at
www.glp.de/en/service, by email at info@glp.de, or by telephone at the following
numbers:
●
GLP Germany: +49 (7248) 927 1955
●
GLP N. America: +1 818 767-8899
Figure 9. Lamp adjustment screws
Figure 10. Main fuse
PRELIMINARY