GLP Highlander Wash, Быстрый старт и руководство по безопасности

Страница: 12 / 36

www.glp.de
12
Highlander Wash Quick Start and Safety Manual
●
Do not aim other high-powered beam lights directly at the fixture.
Avoiding damage to the lamp
●
If power has been applied to the lamp and then the lamp is powered off, wait for
minimum 5 minutes – or until the HOT message disappears from the display – before
you try to restrike it.
●
Before shutting down power to the fixture, shut down lamp power but leave power
applied to the fixture for at least 30 minutes. This will allow the cooling fans to cool
the lamp down in a controlled manner and avoid hotspots that can damage the
lamp.
●
Keep the lamp perfectly clean. Wear clean gloves when changing the lamp.
Avoiding damage from dust and airborne particles
●
Carry out regular visual inspections of every fixture to make sure that there is no
accumulation of dirt, especially on the front glass and on air vents.
●
If cleaning is necessary, follow the instructions in ‘Service and maintenance’ on
page 23.
Transportation and storage
●
Transport the fixture either in a flightcase or in its original packaging to protect it from
damage caused by shocks during transportation.
●
Release the fixture’s tilt lock before putting the fixture in its flightcase for
transportation. Before closing the flightcase, check that the protective liner in the
flightcase will hold the head and protect it from shocks.
●
Store the fixture in a dry location when not in use.
PRELIMINARY