GLP Highlander Wash, Быстрый старт и руководство по безопасности

Страница: 7 / 36

German Light Products
®
Highlander Wash Quick Start and Safety Manual
7
●
Use a power cable that is minimum 14 AWG or 1.5 mm
2
, minimum 16 A-rated and
temperature-rated to suit the application. In the USA and Canada the cables must
be UL-listed, type SJT or equivalent. In the EU the cables must be type H05VV-F or
equivalent.
●
Disconnect the fixture from power before attempting to replace the main fuse.
Replace the fuse with one of the specified type only (see the fixture’s specifications
at the end of this manual).
Fire safety and protection from burns
●
Do not operate the fixture if the ambient temperature exceeds 45° C (115° F).
●
The hottest parts of the fixture’s surface can reach up to 100° C (212° F) during
operation.
Avoid contact by persons and materials. Do not install the fixture in a
location where there is a risk of accidental contact. Allow the fixture to cool for at
least 30 minutes before handling it.
●
Keep the fixture well away from flammable materials.
●
Do not illuminate surfaces within 8 m (26.3 ft.) of the fixture. The light output from the
fixture is powerful enough to cause burns or fire in illuminated objects at close range.
●
Keep all combustible materials (e.g. fabric, wood, paper) at least 1 m (3.3 ft.) away
from the fixture.
●
Ensure that there is free and unobstructed airflow around the fixture. Provide a
minimum clearance of 1000 mm (39.4 in.) around fans and air vents.
●
Do not place any optical components other than Highlander Wash accessories from
GLP onto the front of the fixture.
●
Do not stick filters, masks or other materials onto the fixture. Do not block the light
output in any way. The front surface becomes hot during operation and can melt or
ignite objects that are in contact with the surface. Ensure that the front surface Is
clean and unobstructed at all times in order to prevent a fire hazard and damage to
the fixture.
●
The fixture’s optical components can focus the sun’s rays, creating a risk of fire and
damage. Do not expose the front of the fixture to sunlight or any other intense light
source, even from an angle.
Eye safety
●
The Highlander Wash is classified as a Risk Group 3 lighting fixture according to EN
62471. Possibly hazardous radiation emitted. Do not stare into the light output from
the fixture. May be harmful to the eyes.
PRELIMINARY