GLP Highlander Wash, Быстрый старт и руководство по безопасности

Страница: 14 / 36

www.glp.de
14
Highlander Wash Quick Start and Safety Manual
Overview of features
The Highlander Wash is for permanent or temporary indoor use in venues where the
distance to illuminated surfaces is at least 8 m (26.3 ft.). It may be used outdoors if it is
protected from moisture and precautions are taken to prevent damage from direct
sunlight. It may be placed upright on a level surface or suspended from a suitable
structure as described in this manual.
The Highlander Wash is not suitable for household use, wherever unattended children
have access to it, for permanent outdoor installation, or in areas where the distance
from the fixture to illuminated surfaces is less than specified.
The Highlander Wash shall be installed, operated, and maintained only by persons with
the training, knowledge and skills to do so safely.
Lamp
The Highlander Wash’s OSRAM Lok-It! 1400/PS Brilliant lamp is a compact, short arc
1400 watt discharge lamp that performs in any orientation. It puts out 27,000 lumens at a
color temperature of 6700 K with a Color Rendering Index of 95. The lamp’s average
rated lifetime is 750 hours. To minimize the risk of lamp explosion and obtain the best light
output, replace the lamp before it reaches its rated lifetime.
Lamp power
The lamp can be operated at two power levels:
●
At the NORMAL power setting, the lamp runs at 1400 W
●
At the ECO power setting, the lamp runs at 1000 W.
You can toggle between these two settings under Lamp Power in the Fixture Settings
control menu.
The lamp will only operate at the
NORMAL power level of 1400 W if the fixture is
connected to AC power at 200 – 240 V. If the fixture senses that it is receiving AC power
at 100-180 V, it will automatically switch the lamp to the
ECO power level of 1000 W. If
the line voltage increases to above 195 V, the fixture will automatically switch lamp
power back to the
NORMAL level.
If Lamp Power is set to ECO , the fixture will keep lamp power at 1000 W regardless of the
AC power voltage that the fixture is receiving.
Control panel and display
The control panel with jog wheel control, backlit graphic LCD display and self-charging
battery allows you to change fixture settings quickly and intuitively under any conditions,
even when the power is off.
Base and rigging options
The base of the fixture has Camlock attachment points for easy fastening of the
included floor stand, omega brackets for clamp attachment and other rigging
accessories. It also has two M10 threaded sockets for direct fastening of half-coupler
rigging clamps using suitable machine screws or bolts.
PRELIMINARY