“NEO” TV SATELLITE ANTENNAS
94
www.glomex.it
ENGLISH
8.3 CONTROL PANEL
With the App and control unit connected, the
App control panel shows the satellites currently
set in the control unit. By clicking on the 3
satellite buttons over the knob it is possible to
change the satellite selected to be used as an
alternative to the physical selector on the control
unit (
Fig. 42
).
After the connection, the App will recognize the
position of the physical selector in the Control
Unit, displaying it. Even later, if you change the
satellite on the Control Unit, the App will update
the display by placing the graphic selector in the
same position as the physical one.
All the information on the antenna operation
(voltage, GPS position, etc.), the information on
the satellite currently selected are shown under
the knob and a graphic that displays the signal
quality level.
Switch to Advanced Mode (
App section for
installers only
).
8.4 SATELLITE DATABASE
By clicking on the “Change Sat Setting” button or
going to the Menu section you can consult the
database of the satellites stored by Glomex
(WITH WEB CONNECTION ONLY) and their
setting parameters.
Once the satellite list stored by Glomex has been
displayed, you can:
1) set the satellite selected in one of the three
positions of the control unit (
Fig. 44
).
2) Test the satellite in the position selected in the
control unit. The test settings are lost when the
control unit is turned off.
Fig. 44
