“NEO” TV SATELLITE ANTENNAS
101
www.glomex.it
ENGLISH
10. UPDATING THE SATELLITE FREQUENCES USING THE SD CARD
If satellite frequencies and database cannot be
updated via App (paragraph 8.5) the SD Card
must be used to do so.
The SD card must be inserted into the relevant
slot on the control unit side.
The SD card used for updating must be
formatted in FAT32. Then the CFG.BIN file
provided must be copied on the DD card;
proceed as follows:
1. Make sure that the switch on the control unit is
set to OFF.
2. In case of built-in installation: remove the wall-
mounting plate (see
Fig. 33
), loosen the screws
and remove the built-in control unit.
3. Insert the SD card into the relevant slot on the
control unit side, as indicated in
(Fig. 54
),
respecting the direction (side with manufacturer
label up) and making sure you have completely
inserted it.
4. Turn on the control unit (set B key,
Fig. 39
, to
ON).
5. If the control unit detects the presence of a SD
card with original GLOMEX software, the led
turns orange and automatically starts the
software updating procedure.
6. If the led stays red and the antenna moves, this
means that no original GLOMEX software has
been detected, or that the SD card has not been
inserted completely. Turn off the control unit and
repeat the procedure from step 5.
NOTA:
if the control unit is not immediately
turned off, in a few seconds the led will turn
orange and then green, according to the
standard satellite searching procedure; turn off
anyway and repeat the procedure from step 5.
7. If the update is correctly carried out, the led
turns green. Otherwise, the led turns red and it is
necessary to turn off the control unit and to
repeat the procedure from step 5.
8. Turn off the control unit, remove the SD card
and reinstall the rear cover onto the control unit.
9. In case of built-in installation: insert the control
unit into the wall, reinstall the fastening screws
and the installation plate.
S
WARNING
In case of repeated failures in the software
update procedure, please contact the GLOMEX
Service Centre.
NOTA:
it is possible to download the necessary
software updating file from the Glomex website
(www.glomexmobile.com) in section “Technical
Support - Download Area”.
GL00286
Fig. 54