“NEO” TV SATELLITE ANTENNAS
98
www.glomex.it
ENGLISH
NOTA:
The smartphone/tablet must be as close
as possible to the control unit for the entire
updating procedure.
Once updated successfully, the control unit LED
becomes green, then turn the control unit off
and back on to finish updating (
Fig. 49A
).
In case of problems during the update
procedure, an error message appears on your
smartphone/tablet and the control unit LED
becomes red. In this case, the control unit must
be reset as indicated in paragraph 8.1.
If the control unit software cannot be updated
via App, use the SD Card, please refer to
paragraph 11.
9.3 UPDATING THE BOARD ANTENNA
SOFTWARE
When Glomex releases the update of the control
unit software a push notification is sent.
When the App is launched, this update is
highlighted by an icon on the upper bar on the
top right (
Fig. 49
). This icon allows you to display
the contents of the update and proceed with
updating if you want.
Before updating, turn the control unit on and
connect the smartphone/tablet to the control
unit as indicated in paragraphs 8.1 and 8.2.
When updating the software, the control unit
LED blinks with an orange light.
NOTA:
The smartphone/tablet must be as close
as possible to the control unit for the entire
updating procedure.
Once updated successfully, the control unit LED
becomes green, then turn the control unit off
and back on to finish updating (
Fig. 49A
).
Fig. 48
Fig. 49
