GILES OVH-10-C, Руководство по эксплуатации и обслуживанию

Страница: 45 / 54

35
Model: OVH-10-C Model: OVH-10-C
This section describes basic troubleshooting procedures for the OV H - 10 - C H o o d . The wiring diagram
attached inside the back cover is provided to assist qualified technicians with more in-depth
troubleshooting.
6-01. Troubleshooting Procedures
•
T
roubleshooting for electrical problems should be performed ONLY by a qualified service technician or
electrician. Serious injury, or even death, will result from contact with energized electrical
components.
• Failure to comply with these DANGER notices can result in death or serious injury, equipment or
property damage, and possibly void the warranty.
!
DANGER
Problem Probable Cause Corrective Action
Hood will not turn on
a. Filter Access Door not in place Install & secure Access Door.
b. On ILS Model “PUSH TO
START” button not held for at
least 5 seconds
Hold down “PUSH TO START”
button for 5 secs.
c. Power Switch is faulty Replace Power Switch.
c. Improper supply voltage
Connect to proper electrical
supply.
e. Not properly connected to
power source.
Confirm connections & correct.
f. Blown fuse or tripped circuit
breaker.
Check fuse in hood and main
breaker box.
Charcoal or Baffle Filter Missing
light illuminated at Initial Start-
up
a. Baffle Filter is not installed or
not properly seated
Install Baffle Filter and/or check
alignment in track.
b. Charcoal Filter is not installed
or not properly seated
Install Charcoal Filter and/or check
alignment in track.
CHECK and/or WASH LED
illuminated & intermittent
(beeping) alarm sounding
a. EAC shorted (damaged) Replace or repair the EAC cell.
b. EAC dirty Clean the EAC cell.
c. EAC high voltage power supply
is faulty.
Replace high voltage power
supply.
d. High voltage wires shorted to
ground.
Correct shorted condition.
e. Faulty EAC contact plate Replace contact plate.
6. Trouble-Shooting