GILES OVH-10-C, Руководство по эксплуатации и обслуживанию

Страница: 14 / 54

4
Model: OVH-10-C Installation
2. Installation
This section summarizes the procedures necessary to install your new OVH-10-C Countertop Hood.
Before installing and attempting to operate, please read the contents of this manual thoroughly. Following
these procedures will help ensure safe and proper installation.
The unit is shipped on a wooden skid with protective framing, secured to the skid by high-tensile plastic
strapping and wrapped with machine applied stretch-wrap. Perform the following steps to unpack the
unit:
1. Position the palletized unit in an area with sufficient space for unpacking.
2. Cut and remove stretch-wrap and all strapping.
3. Use appropriate tools to remove the wooden crate from around the unit.
3. Remove any packed accessories and/or parts from the skid and set aside.
4. The unit is extremely heavy. Using suitable lifting equipment or adequate manpower, lift the unit and
remove it from the shipping skid. See Section 1-4.3, Hood Weights .
5. Properly dispose of all shipping materials.
2-01. Unpacking
!! IMPORTANT NOTE:
•
If the palletized unit showed any signs of damage, you should have immediately inspected the
equipment and any other packed accessories, and promptly notified the freight company of any and all
damages. Typically, it is the customer’s responsibility to claim freight damage.
•
The unit is extremely heavy and somewhat top-heavy! Exercise due caution when handling to avoid
personal injury or damage to the equipment. Take precautions not to damage the hood’s Base or
Skirting.
•
Exercise care when removing the wooden framing from around the unit to avoid any exposed nails or
staples.
•
Failure to comply with these CAUTION notices may result in minor to moderate injury, damage to
equipment or property, and void the warranty.
!
CAUTION