GILES Chester Fried CF 400 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 79

background image

27

Preparing the Fryer for Operation

5 - 2 Cleaning of Filter Pan/Replacement of Filter Paper

The following steps should be taken with the Filter Pan removed from the fryer. The Filter Pan should be
thoroughly cleansed during each “Boil Out” procedure. Do not attempt to clean the Filter Pan when pan is
still in fryer cabinet.

1.

Remove accumulated breading and residue from the surface of the filter paper with the metal crumb
shovel supplied with the fryer. Remove residue from the small edge which surrounds the Hold-Down
frame.

2.

Release the four Hold-Down latches which secure the frame which holds the filter paper in place.

3.

Remove the Hold-Down frame from the Filter Pan and place it in the sink for cleaning.

NOTE:

Use only Chester Clean or a suitable alkaline based cleaner to clean the Hold-Down frame as well as the
other interior surfaces and components of the Filter Pan. Liquid dish washing detergents may leave
residues which reduce shortening life.

4.

Beginning at one end of the Filter Pan, carefully roll up the filter paper and throw it away.

5.

Remove the metal weave beneath the filter paper and place it in the sink for cleaning.

6.

Drain any remaining oil from the bottom of the Filter Pan into a proper waste receptacle. You must lift
and tilt the Filter Pan to accomplish this. The Filter Pan is heavy, so you should have assistance.

7.

Clean the interior of the Filter Pan with one of the cleaners previously recommended. Clean beneath the
oil pick-up tube located in the bottom of the Filter Pan with a knife blade or other similar thin, flat
instrument. Rinse the pan interior and mop out excess water with a dry cloth or paper toweling.

8.

Clean and rinse the wire rack and Hold-Down frame which you placed in the sink earlier. Dry them. The
Filter Pan is now ready for re-assembly and installation of new filter paper.

Two sheets of paper are used in the Filter Pan. The Filter Pan must be removed from the fryer to change
the filter paper. Both sheets should be changed following a “Boil-Out”. During normal operation, the top
sheet is discarded on a daily basis. The bottom sheet is then placed on top of a new sheet of filter paper
and the filter paper is replaced in the Filter Pan with the Hold-Down frame. The following simple steps
summarize the procedure for replacement of the filter paper on a daily basis.

Daily filter paper replacement is recommended!

«
...
28
29
30
31
32
...
»

Содержание Chester Fried CF 400
















































































Отзывы:

Нет отзывов

Похожие инструкции для Chester Fried CF 400

Бренд: Raymarine Страницы: 55

Бренд: Halyard Страницы: 4

Бренд: Sagola Страницы: 8

Бренд: DARAY Страницы: 28

Бренд: MacDon Страницы: 88

Бренд: Jiffy Страницы: 15

Бренд: e+p Elektrik Handels Страницы: 2

Бренд: M-system Страницы: 5

Life/form SmartScope LF01142U

Бренд: Nasco Страницы: 2

Бренд: MAGSTIM Страницы: 86

i-limb access hand

Бренд: Össur Страницы: 246

PROPRIO FOOT PSX01

Бренд: Össur Страницы: 374

Бренд: Onwa Страницы: 35

Бренд: B medical systems Страницы: 28

Бренд: K-SPORT Страницы: 5

Aristo WeldCloud Mig U5000i

Бренд: ESAB Страницы: 28

Pro hunter 2525

Бренд: SprotDog Страницы: 28

Бренд: Orliman Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды