GILBARCO VEEDER-ROOT FlexPay IV CRIND, Руководство по установке

Страница: 15 / 66

11
SECTION 3 - REMOVING COMPONENTS
3
MDE-5222F
6
Remove any existing old gaskets on the option door opening. You may use a putty knife or scraping
tool (see Figure 3 ).
Figure 3: Removing Old Gaskets
Old Gasket
UL Bucket
Remove the existing UL bucket by loosening and removing the four 1/4-inch screws that secure it to the unit
door. There are two screws on each side, top and bottom (see
Figure 4 ).
Note: The UL bucket must be removed and remounted with Z-brackets. For UL bucket installation,

see Figure 13 on page 30 .
Figure 4: Removing Existing UL Bucket
Screw (4X)