Gilat SkyEdge IIc, Руководство пользователя

Страница: 43 / 88

Installing Dish
July, 2013 41
Proprietary and Confidential
Shortening the cables must be performed carefully: they are supplied with Tx and
Rx stickers; cutting off the excess length of
both cables together will make it
impossible to determine which cable is which.
You need to cut one cable first, and mark it (Rx or Tx, depending on which cable
you are cutting off) with a permanent marker or a sticker to ensure that after cutting
off the other cable, you will be able to determine which cable is which.
Note that one of the cables has a running mark printed lengthwise - it also allows
you to differ between the Rx and Tx cables.
2. Strip about 18 mm of the outer jacket only.
3. Fold the wire shielding backwards over the cable jacket (but do not remove the
aluminium foil).
4. Strip 8 mm to the inner conductor.
5. Insert the stripped end of the cable into the F-connector as deep as you can.
6. Screw the F-connector on the wire by hand, applying sufficient force, until the
internal insulation is aligned with the rim of the connector.
Verify that throughout, the procedure the cable is centered and straightened in the
connector. Otherwise, you will not be able to screw the connector to the
end-position on the cable.