Installing Dish
Installing Equipment
24
CPE Installation and Pointing
Proprietary and Confidential
Figure 11: Assembling the Back Bracket with the Az/El
2.
Position the back bracket with its rear surface to the Az/El.
3.
Apply the skew plate to the back bracket with the arrow marking facing forward.
4.
Insert the four bolts through the holes in the skew plate and the Az/El.
5.
From the rear side, place a flat washer, a spring washer, and thread a nut on each
bolt.
6.
Tighten the nuts
by hand
leaving enough freedom to allow rotation of the back
bracket.
Mounting Az/El on Pole
To mount the Az/El+back bracket on the pole:
1.
Loosen the clamp nuts.
2.
Release the clamps from the bolts on the open side.
Содержание SkyEdge IIc
