GI.BI.DI AS05581, Руководство по установке

Страница: 41 / 60

BA230
41
UK
A C F H E
A 1 2
ESC
ESC
-
-
OK
OK
+
+
When the display shows the main menus (letters ACFHE or just some
of them depending on which password was used to access
programming) let the letter A blink by moving to the right or to the left
with the b or –
Once the letter A blinks confirm with the OK button
By means of + or – buttons you can select the submenus (A3, A5)
The digits on the lcd are fixed to show that is no possible any modification.
The button ESC lets you to go to the upper level (menus A, C, F, H E).
With OK button you enter the selected menu and the digits start blinking
to show that is now possible to modify the values and the ESC button
becomes irrelevant.
Right now with + e – buttons you can change the settings of the selected
menu.
With the OK button you confirm the data and return to the selected menu
with fixed digits.
MENU A: SYSTEM CONFIGURATION AND OPERATING LOGIC SELECTION
A 2 3
ESC - OK +
Right now with + and – buttons you can scroll the other submenus of
the menu A and you can follow the same procedure shown above.
The ESC button lets you to go to the upper level (menus A, C, F, H E).
Menu Function Status Description
A1
A2
TYPE OF INSTALLATION
NUMBER OF MOTORS
2
3
2
It configures the system for swing gate, overhead door or barrier.
It configures the system for a sliding gate.
This configuration automatically excludes:
·gate phase shifts in opening and closing
·hammer stroke
·2 seconds final opening and closing stroke.
·T3 time
·hydraulic locking maintenance
WARNING : the limit switches are NOT activated automatically,
choose the best configuration with the menu C4
It configures the system for one motor.
In the menu E7 it will be possible to set the courtesy light output:
1 = courtesy light disabled
2 = courtesy light on MOTOR 2 output
3 = courtesy light on ELECTRIC LOCK 2 output
The courtesy light output is 3-minutes timed.
Example Programming MENU A
Description MENU A