GI.BI.DI AS05581, Руководство по установке

Страница: 40 / 60

BA230
40
UK
0 0 0 0
0 0 0 0
A C F H E
_ _ _ _ _
ESC
ESC
ESC
ESC
-
-
-
-
OK
OK
OK
OK
+
+
+
+
The fourth digit blinks.
If you want to enter the ADVANCED programming, by means of + or –
keys type the fourth digit of the installer code set in the menu E92.
Once you get to the desired digit confirm with the OK button and go
to the next step.
If you want to enter the BASIC programming, confirm the digit 0
The ESC button will move the flashing digit to the left until the first digit.
By now the installer code is completed: if it is right you go to the next step.
If the installer code is wrong the message PASS appears again
Proceed with the programming of the menus following the instructions
in the relevant paragraphs.
Once the programming is completed press and hold for 3 s the ESC
button to store the settings and exit from programming procedure.
Simultaneously appears the message EXIT
If there is no mismatch between enabling and input status appears the
screen you can see here beside, otherwise it will appear an indication of
which input has a fault.
Refer to the paragraph “CHECK ENABLED INPUT”
In this case the b and OK will mean:
+
START OK STOP
→ →
0 0 0 0
ESC - OK +
The third digit blinks.
If you want to enter the ADVANCED programming, by means of + or –
keys type the third digit of the installer code set in the menu E92.
Once you get to the desired digit confirm with the OK button and go
to the next step.
If you want to enter the BASIC programming, confirm the digit 0
The ESC button will move the flashing digit to the left until the first digit.