GI.BI.DI AS05581, Руководство по установке

Страница: 44 / 60

BA230
44
UK
C 2 2
ESC - OK +
Right now with + and – buttons you can scroll the other submenus of
the menu C and you can follow the same procedure shown above.
The ESC button lets you to go to the upper level (menus A, C, F, H E).
Menu
C1
C2
C7
C8
C9
C3
C4
C5
Function
FAST CLOSING
FLASHING LIGHT
PHOTOCELL 1
PHOTOCELL 2
SAFETY EDGE
PREFLASHING
LIMIT SWITCH
DECELERATIONS
Status
1
2
1
1
1
1
2
1
1
3
2
4
5
2
3
3
2
2
2
3
2
Description
It disables the fast closing function
Blinking flashing light output
Photocell 1 disabled
Photocell 2 disabled
Safety edge disabled
Disables pre-flashing.
The flashlight and the motors START at the same time.
Enables 3-second pre-flashing before motor START
Disables the limit switch reading.
Disables the deceleration function
Enables the type 2 deceleration function. .
With this selection, the variation in the leaf speed is more noticeable.
Enables the type 1 deceleration function. With this selection you can
regulate the motors thrust. A decrease in the leaf speed may be not
noticeable.
Enables the type 3 deceleration function.
Mix of the 2 previous modalities.
The functioning is deeply influenced by the type of motor.
Enables the type 4 deceleration function.
This modality is to be used in case of emergency or particular
functioning conditions. The motor is driven in type 1 modality for 1s,
then it turns off for 1s. The door movement intermittent modality
is synchronized with the command.
Enables the single reading of the limit switch.
See paragraph “ LIMIT SWITCH OPERATION ”
Enables the double reading of the limit switch.
See paragraph “ LIMIT SWITCH OPERATION ”
Fixed flashing light output
Photocell 1 enabled
Photocell 2 enabled
Safety edge with 8K2 in series resistor enabled
Safety edge with NC contact enabled
Enables fast closing function
Active only on photocell 1.
Operation :
Reduces the stand-by time to 3 seconds following interception and
subsequent freeing of the photocells.
Description MENU C