USER INSTRUCTIONS
28
Setting the parameters of the remote elements
From the thermostat display, you can modify the parameters relating to the general remote
element. The screens of the Set menu of the individual remote element are shown below.
Repeat the programming for all the remote elements (P01, P02, P03, P04) that are present.
To access the pages for setting the parameters of the remote elements, start from the
visualisation screen of the required element (see
Choosing the page you want to see - page
10
), then press the
button key.
Choosing the HVAC mode (pre-comfort, comfort,
economy or OFF)
Use the
or
button key to select the required HVAC
mode (ECO = economy, PREC = pre-comfort, COMF =
comfort, or OFF). This screen is only visible if the remote
element control type has been set in HVAC mode via the Easy
configurator. To confirm your choice and move on to the
next parameter, press the
button key within 30 seconds.
Setting the setpoint
Use the
or
button key to modify the setpoint. This
screen is only visible if the remote element control type has
been set in Setpoint via the Easy configurator. To confirm
your choice and move on to the next parameter, press the
button key within 30 seconds.
Setting the type of operation
Use the
or
button key to set the type of operation
(heating or cooling).
To confirm your choice and move on to the next parameter,
press the
button key within 30 seconds.
The setting of the remote element parameters is now
complete. Press the
button key to return to the remote
element visualisation screen.
