USER INSTRUCTIONS
E
N
G
L
I
S
H
11
or wait for the 5-second time-out period to elapse. The use
of forcing is indicated by the flashing of the , , symbols.
It remains active until the active HVAC mode is modified.
Pages relating to the thermostat (control type: setpoint)
Forcing the setpoint manually
If the displayed page relates to the thermostat, and the
control type has been set in setpoint, press the
or
button key to temporarily force the setpoint (max variation
±3°C). The forcing remains active until the operating
setpoint is modified, or until the thermostat is manually
switched off.
Manual switch-off
If the displayed page relates to the thermostat, and the
control type has been set in setpoint, press the
button key
to switch off the device manually (
).
Press the
button key again to reactivate the device; when
the button key is pressed, the active setpoint will be shown
for a few moments.
Pages relating to the thermostat (control type: HVAC or setpoint)
Choosing the fan coil speed
If the displayed page relates to the thermostat, and the
control type is setpoint or any HVAC mode other than OFF,
press the
or
button key simultaneously to access
the selection page (the control algorithm of heating/cooling
operation must be set on “fan coil”). Use the
or
button
key to select the required fan coil setting ( ,
,
or
),
then confirm with the
button key or wait for the 30-
second time-out period to elapse.
