German Light Products GT-1 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 40

background image

German Light Products

®

GT-1 User Manual

9

Installation safety and protection from personal injury

•

The lamp is heavy and requires two persons to lift it safely. Do not lift it alone.

•

Installation must be performed by qualified personnel only and carried out in
accordance with applicable regulations such as DIN VDE 0711-217.

•

The product is not portable when installed.

•

Ensure that the supporting structure and installation hardware used can hold at least

ten times the weight of the load that they support.

•

Fasten the product to a structure or surface only as directed in this manual and only
with hardware that is specifically designed and rated for its purpose. Do not use a
safety cable as the primary means of support. Check that installation hardware is in

perfect condition. Fasteners must be steel grade 8.8 strength or better. Rigging
clamps must be half-coupler type that completely encircle the rigging truss chord.

•

If the product is installed in a location where it may cause injury or damage if it falls,

install as directed in this manual a safety cable or similar secondary attachment that
will hold the product if a primary attachment fails. The secondary attachment must
be approved by an official body such as TÜV as a safety attachment for the weight
that it secures, it must comply with EN 60598-2-17 Section 17.6.6, and it must be able
to support a static suspended load that is ten times the weight that it secures.

•

If the product is installed in a location where it may be exposed to forces such as
wind pressure, vibration or movement, make sure that the installation can withstand
these forces. Monitor weather forecasts constantly. Take down the installation

immediately if there is any risk of weather conditions that could destabilize the
installation.

•

Check that all covers and items of rigging hardware are secure before using the
product. Do not operate the product with missing or damaged covers, shields or any

optical component.

•

Restrict access below the work area and work from a stable platform whenever
installing, servicing or moving the product.

•

If the product becomes damaged, stop using it immediately and disconnect it from
power. Do not attempt to use a product that is obviously damaged.

•

Do not modify the product in any way not described in its user documentation.

•

Install genuine GLP parts only.

«
...
7
8
9
10
11
...
»

Содержание GT-1









































Отзывы:

Нет отзывов

Похожие инструкции для GT-1

Бренд: Makita Страницы: 17

Бренд: Makita Страницы: 13

Бренд: Facsimile Страницы: 16

Бренд: B&G Страницы: 3

Бренд: Baroness Страницы: 40

Бренд: Baroness Страницы: 40

Бренд: BARKO LOADERS Страницы: 85

Бренд: NANLUX Страницы: 39

Бренд: Fayat Group Страницы: 50

Бренд: Halyard Страницы: 88

9NP-B7524 Series

Бренд: Nautilus Страницы: 2

Be strong NS 700X

Бренд: Nautilus Страницы: 34

Бренд: Nautilus Страницы: 21

LSP400 LED Series

Бренд: WE-EF Страницы: 6

Бренд: Kobelt Страницы: 20

Бренд: Pottinger Страницы: 39

Бренд: WAGNER Страницы: 20

Бренд: Trigano Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды