German Light Products GT-1, Руководство пользователя

Страница: 29 / 40

German Light Products
®
GT-1 User Manual
29
Head maintenance
Removing head shells
Before removing the head shells, disconnect the fixture from power and allow it to cool
for 60 minutes.
To remove the top head shell, orient the head as shown below with the front lens to the
right and the yoke arm with the GT-1 logo facing you. To remove the bottom head shell,
orient the head with the front lens to the left.
Remove the head shells as follows:
Release the four shell retaining pins by turning them a quarter turn counterclockwise
with a slotted screwdriver.
Lift the head shell up from the front.
Release the shell safety cable.
Lift the head shell further to free it from the rear cover and remove.
Follow these steps in reverse to reinstall head shells. Start at the back of the head and
align the opening in the head shell with the air vent to get started.
2
3
1
Figure 13. Head cover removal