German Light Products GT-1, Руководство пользователя

Страница: 30 / 40

www.glp.de
30
GT-1 User Manual
To remove the rear head cover, simply remove the screw in each corner.
Gobo change, single gobo
Note: Wear gloves when handling gobos. If replacing multiple gobos, it may be easier to
remove the module.
To replace a single gobo, proceed as follows:
Remove the top head shell as described above.
Move the desired gobo slot to the access port. If selecting slots by DMX, select 3 slots
ahead (select slot 5 to change the gobo in slot 2, select slot 3 to change the gobo in
slot 9).
Turn the holder so the ends of the gobo spring are at the top of the plate as shown
to left in Figure.
Using needle-nose pliers, compress and remove the gobo spring.
Using a small, soft tool such as a bent cotton swab, gently press the gobo up out of
the holder as shown below to right, and remove.
Insert the replacement gobo with the coated side facing the lamp.
Replace the gobo spring and rotate the holder to verify that the spring is fully seated
against the disc.
Replace the top head shell.
Figure 15. Removing a glass gobo
Figure 14. Rear head cover removal