German Light Products GT-1, Руководство пользователя

Страница: 12 / 40

www.glp.de
12
GT-1 User Manual
3. Overview of features
Intended use
The GT-1 is for permanent or temporary indoor use in venues where the distance to
illuminated surfaces is at least 16 m (52.5 ft.). It may be used outdoors if it is protected
from moisture and precautions are taken to prevent damage from direct sunlight. It
may be placed upright on a level surface or suspended from a suitable structure as
described in this manual.
The GT-1 is not suitable for household use, wherever unattended children have access
to it, for permanent outdoor installation, or in areas where the distance from the fixture
to illuminated surfaces is less than specified.
The GT-1 shall be installed, operated, and maintained only by persons with the training,
knowledge and skills to do so safely.
Lamp
The GT-1’s OSRAM SIRIUS HRI 440W lamp is a compact reflector lamp with a very short
arc and high light output optimized to create sparkling effects. The lamp was
developed specifically for moving heads to perform in any position. It outputs 22,000
lumens at a color temperature of 7300 K with a color rendering index of 80. The lamp’s
average rated life is 1500 hours. To minimize the risk of lamp explosion and obtain the
best light output, replace the lamp after 1000 hours of use.
Pan and tilt
The GT-1 pans through 640° and tilts through 262° with coarse and fine control channels
and self-correcting position feedback. Position feedback can be disabled and control
of pan and tilt can be reversed using the control panel or by DMX.
Color
CMY color mixing
The GT-1 provides CMY color mixing with progressively saturated cyan, magenta, and
yellow wheels. The
Old CMY curve setting is for use on prototype fixtures that had
different CMY wheels.